Impact Implement 1-Point Lift Base Height Adjustment
Impact Implements Chisel Plow for ATV/UTV with 2" Receivers
One Point Lift System by Impact Implements | UTV | ATV | Octane Ridge
atv utv sleeve hitch
Electric Remote Sleeve Hitch for ATV, UTV or Garden Tractor.
Home Made 1 Point Hitch
Disc Plow by Impact Implements | UTV | ATV | Octane Ridge
Impact Implement Chisel / Tine Plow by MotoAlliance
atv utv sleeve hitch
The BEST ATV System. (THE ONLY IMPLEMENT, ATTACHMENT YOU NEED FOR YOU ATV / UTV)
Amazon Price: N/A (as of June 21, 2017 11:54 pm –
IMPACT IMPLEMENTS 1-Point Lift System turns your ATV, UTV or lawn/garden tractor into an all-purpose work machine. Quick-attach, durable attachment accessories go on & off the ATV/UTV/Lawn Garden Tractor easily with a single hitch pin. Manual lift & lower adjustments allow accessories to apply down-force for ground engagement. The Impact Implements 1-Point Lift System is easy to adjust and installs into a 2" hitch style receiver already installed on the ATV, UTV or lawn tractors.
• Heavy Duty, 14 gauge tube steel construction
• Multi-height adjustments
• Manual crank / lift for an additional 10" of fine adjustments
• Single hitch pin (included) attachment for quick and easy accessory changes
• Three (3) different positions of assembly to allow for various starting point positions of implements
• Fits 2" hitch receiver (not included)
• weight: 20.5 lbs
Available IMPACT IMPLEMENT Accessories:
• Landscape Rake with Tipper Latch
• 3-Position Blade with Box Ends
• Chisel Plow
• Disc Plow
• Weight Tray
• Off-Road Trailer
but the installation was quite easy. My receiver is a little over the 10"-12" …
13 people found this helpful.
Got this along with the landscape rake and blade to attach to my 2006 ranger. The direction sheet was a bit damaged, but the installation was quite easy. My receiver is a little over the 10″-12″ recommendation and that made the attachments a little high. I installed the lift with the most downward pressure, but had to leave 2 blank holes between the lift arms when 3 are recommended. The 4 stars I gave reference the lack of deeper adjustments which would have been accomplished by making the “tool tube” just a little longer on the vertical side (ie: 9 holes instead of 7 which would make it a couple inches longer). I haven’t researched yet, but perhaps a little extra weight (40-60 lbs) on the “main hitch frame” would greatly enhance the action. There is a bracket welded on it, but no mention on the instructions. All-in-all, I am very satisfied with this purchase and will do the jobs needed without having spent a bundle.
Good Product for the price
16 people found this helpful.
I purchased this one point to mount on my 2012 King Quad 750, here is my review:
I had visions of great joy drinking coffee while watching my wife clear the snow with minivan
23 people found this helpful.
I bought this for my wife for Christmas. I had visions of great joy drinking coffee while watching my wife clear the snow with minivan. I modified the design to use a winch to raise and lower. Due to my modification down pressure is just the weight of the plow. I will need more weight because it skimmed on top of wheel tracks leaving 1 inch of snow, considering I was moving 6+ inches I was happy. The above vision hasn’t come true yet…but still holding on to the dream 🙂 + snow removal inside of nice warm van (hatch door open to view blade placement). Plenty of weight of vehicle to get traction. Assembly small enough to fit into minivan with stow n go seats in stow position. Used a spare battery to isolate from van electrical. (probably not necessary). Neighbors think I’m cool….that won’t last long.
3 people found this helpful.
Works perfectly for my application also purchased the Motoalliance 50″ landscape rake. Had no issues with the lift at all. I did however lubricate the threaded shaft and pivot joints with Never Seize. One mod was to extend the handle shaft up 6″ to get crank above rear deck. One other item: Be sure you have a quality 2″ receiver that not only attaches to the existing “ball” mount on single rear axle housing but one that extends and also connects to the swing arm. The factory “tow ball” mount will not accept any down force, IT WILL BEND…..period. Independent rear suspension have a good mounting points for their receiver. Kolpin makes a GOOD one for most any model ATV. Granted this is not a industrial strength lift system BUT perfect for a 4 wheeler limitations and for under $200.00 you can not go wrong. Not only on my 2 acre lawn but use it to prep those out of the way white tail/turkey food plots. I did snap one of the tines on the rake BUY called Motoalliance had a replacement within 2 days.
Single Point Lift System
7 people found this helpful.
I bought a UTV accessory (a box scraper) from Amazon. It is designed for a three-point sleeve hitch, like a tractor might have. My Kawasaki Mule just has a conventional trailer hitch. So, I had to make an attachment for a sleeve hitch adapter which I couldn’t find on Amazon. However, that particular piece is a real niche item. Anyway, now, everything works very well. This Single Point Lift System does a couple of critical things for me. It now attaches the box scraper to the Mule and allows it to be raised or lowered.This product is ingenious, well designed, and ruggedly built! Hallelujah!
One person found this helpful.
Bought this to use with chisel plow and box blade on my ATV… wanted to make sure the implements worked but was a little hesitant on spending the money on the hydraulic version… If you don’t need many height adjustments then this is your lift system. Since I have to raise the box blade to transit back to the bottom of the driveway on each pass I’ll be getting the hydraulic version in the near future.
One person found this helpful.
This works great. I have used it on my Honda side by side for two seasons now. I have the chisel plow and landscape rake attachments for it. So far this is the best option for ATVs. I used it to plant several food plots and to clean up roots and limbs at a pole barn construction site. Easy to use and works great. It does have a bit of wiggle to it but that probably keeps things from breaking. Overall I am very satisfied.